| |
SOLUTIONS |
|
| |
|
|
| INTELLIGENT AUTOMATIC METER
READING (IAMR) |
| IAMR
collects data from energy meter and other devices continuously
at field and exchange this data with base station thru wire
and wireless communication. It has several features like Automatic
monthly billing, Detecting tamper conditions, sending alerts
to control room as well as field officials, Collecting instantaneous
parameters. The IAMR is Compatible with various types and
makes of energy meters. |
| |
|
|
 |
Download pdf |
| DISTRIBUTION TRANSFORMER
MONITORING SYSTEM (DTMS) |
| The main objective of DTMS
is to Monitor and control the Distribution Transformer.
The features include Energy measurement, Remote data acquisition,
Peak load management, Energy accounting, Transformer health
monitoring, Remote switching and so on. This communicates
with master with DNP3 protocol and/or GSM SMS. |
| |
|
|
|
Download pdf |
| POWER QUALITY MEASUREMENT SYSTEM (PQMS) |
| Power Quality Measurement System has been devised specially to monitor interruptions, durations, voltages, power factors etc. at each distribution transformer level. This system enables collection of these parameters round the clock without any human assistance and works remotely from any station through GSM/GPRS.This equipment enables continuous improvements in the power quality and enables comparision among various sects of consumers, to the different power utilities. |
| |
|
|
|
|
| REMOTE STREET LIGHT CONTROL SYSTEM (RSLCS) |
| Any Street light JB can be controlled from the central location, The switch ON/OFF time can be configured from the central location, The ON / OFF timings can be programmed as per the seasonal changes. Individual phases can be switched ON & OFF at different times, as per the traffic movement, automatically, for saving energy. |
| |
|
|
|
Download pdf |
| GENERAL AUTOMATIC METER
READING (GAMR) |
| It collects
the data from the electronic energy meter using optical connection
(no direct electrical connection). It Interacts with the base
station or with a cell phone using GSM modem and all the parameters
of the meters can be collected by a remote data call. It is
supplied in a slim Aluminum channel enclosure and low cost
communication using SMS/Data calls. Energy Billing Data can
be prepared for all the consumers, with a single command from
a central station. |
| COMPACT MODEM |
| ICSA Compact Modem is highly flexible device for easy integration with RS 232 and audio*
interface. It is fully equipped with features like circuit switched data, SMS, Voice and
GPRS. This instrument is a robust solution for Remote Data Transfer, Automatic Meter
Reading, Industrial Automation, Telemetry, SCADA and many other applications. Compact
Size, Easy Mounting arrangement, Metal casing and integration of state of the art
Technology make ICSA Compact Modem a unique solution for almost all applications. |
| |
|
|
|
Download pdf |
| AGRICULTURAL LOAD MANAGEMENT SYSTEM (ALMS) |
Agricultural Load Management System is meant for supplying power to farmers during specified time with assured time duration. It reduces the stress on LT lines, distribution transformers, sub-station and system in view of diversified usage. Lesser failures of distribution transformers due to diversified load and lesser interruptions, reducing the system peak demand, substantial reduction on technical losses are some of the core benefits of ALMS. |
| |
|
|
|
Download pdf |
| MICRO REMOTE TERMINAL UNIT
(MICRO RTU) |
| The Micro
RTU monitors and controls sub-station feeders, as a part of
the SCADA system. The micro RTU communicates with15Nos of
Modbus Energy meters on RS485 bus. The MICRO RTU is useful
in energy audit, load survey and fault analysis. The system
supports multiple MODEMs that are standard Public Switched
Telephone Network MODEMs or GSM MODEMs / Radio link. The micro
RTU is capable of communicating to SCADA on various standard
protocols like modbus, IEC, DNP3, DLMS etc. |
| |
THEFT DETECTION DEVICE (TDD) |
|
| TDD aims to
identify theft at LT pillars (Junction Boxes used for underground
power distribution lines) under different tamper conditions.
It continuously monitors energy and sends IP (instantaneous
parameters) like voltages, currents, power etc. to the base
station. It also Detects tamper conditions and sends the alerts
to Base station (Control Room) as well as concerned officials.
In addition, it initiates the local audio alarm. |
|
| |
|
|
|
Download pdf |
| COMPUTERIZED ONLINE DATA
LOGGING SYSTEM |
| Its objective
is on line Monitoring and Data logging of load monitoring
and management including the data of various parameters of
11Kv feeders in a Substation. Its functionality includes Continuous
Online monitoring and logging of various parameters like Load
in MW at each stage, phase wise Voltage, Current & Power
factor, Power, energy, Breaker status, DC auxiliary supply
status. Elimination of manual Interference, Accurate Data
gathering facility with exact time stamping is some of its
advantages. |
| ENERGY AUDIT SERVICES |
| These
services provide energy audit information, giving the details
of the location, quantity and the type of the losses in the
power distribution network. This is achieved by Network Digitization
for permanent asset management and Consumer Database management
with detailed attributes and Incorporation of data acquisition
and control system at Substation and DTR level and IAMRs /
pole top RTUS at consumer locations.. |
| POLE TOP RTU |
| Mounted
on the top of the electrical pole. Measures the energy parameters
of the connection at the pole. Display will be kept in consumer
premises to show the energy meter readings and any message
from the utility. Each unit monitors 15 consumers. Remote
connection/disconnection of supply, Remote monitoring and
communicating to the master station is done through GSM network.
Alarm generation for tamper conditions, line disturbance etc
also sent to master for immediate attention of the maintenance
staff. |
| MULTIPLEXER UNIT (MUX UNIT) |
| Its
main objective is to collect the data from number of meters
located at a single location, using a cost effective single
unit. Collects data from 8 or 16 meters, using single modem.,
Communicates to the meters which are distributed over an area
of 100 m |
| INTELLIGENT AUTOMATIC WATER
READING (IAWR) |
| Getting
Consumption data of water delivered, on daily and monthly
basis at the base station using GSM network, Controlling the
delivery valve, SMS messages to consumers regarding bill amounts
and payment receipts, Battery back up facility for 24 hours
for enabling operation in case of power failure, are some
of its features. It also include special features like Theft
detection, Detection of Using Motors for sucking excess water
e.t.c. |
| |
| |
|
| |
|
| |
| |
